Hobart 00-274227-4 Dishwasher Gasket
$7.96
Specifications:
| Attribute | Details |
|---|---|
| Cork Gasket, 5-1/4" Dia Od X 3-7/8" Dia Id, | |
| 4Ea 5/16" Holes | |
| Hobart Dishwasher C44A |
Description
The Hobart 00-274227-4 Dishwasher Gasket is a seal that is used to close the door and the cabinet frame by compressing as the door closes, preventing the escape of water during use. The gasket closes the gap and conforms to the surfaces when the door is closed and assists in keeping the seal intact as the pressure varies within the wash chamber. It fits the door and frame, where contact is modeled on the perimeter and the door opening of the dishwasher. The shape and size conform to certain dishwasher designs
More Information:
- HOBART:00-274227-00004 ,00-274227-4 ,274227-4
Step1: Turn off dishwasher and disconnect power and water supply for safety.
Step2: Remove old gasket and clean sealing surface thoroughly.
Step3: Align new gasket over port, ensuring holes match fittings.
Step4: Press evenly into place without twisting or tearing carefully.
Step5: Reconnect water supply, restore power, and check for leaks during test cycle before use.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
Thank you! Your review has been submitted.
-
What maintenance is required for the Hobart 00-274227-4 Gasket?
Inspect the dishwasher gasket for drying, cracking, or compression damage. Keep the sealing surface clean and dry when possible. Ensure proper sealing and prevent water or steam leaks.
-
What are common issues with the Hobart 00-274227-4 Gasket?
- Cracking due to heat and moisture cycles.
- Loss of sealing ability from compression wear.
- Water leakage around gasket edges.
- Improper fit causing pressure loss.