Cres Cor 0808-116-K Rocker Switch 7/8" X 1-1/2" DPST 20A 120-240V
Specifications:
- [ Rocker ] [ Fits Hole 7/8" X 1-1/2" ] [ On/Off ] [ Dpst ]
- [Terminals 4Ea (1/4" Tabs) ] [ 125/277V 20Amp]
- [ Color Black]
- Bloomfield
- Coffee 8707, 8710, 8711, 8712, 8713, 8714, 8715, 8716,
- 8717, 8718, 8751, 8752, 8753, 8754, 8755, 8756,
- 8757, 8758, 9104.
- Crescor Warmer Phu-18-747-(35,36). Series: 120-Cr, 121-Cr,
- H-339-(124,127,128,188,188-Pt, 1813,Ua-8), H137.
- 129-005 Cabinet, 0617.
- Southbend Griddle Sg,
- Oven Marathon Gold, Saffire, Dilverstar
- Wells Mod Wv-Fg
Description
Dimensions:
- Weight: 0.1 lbs
- Length: 1.75 in
- Height: 1 in
- Width: 2 in
This Part Fits the Following Models
100 modelsA panel-mounted electrical control switch like this is used to turn commercial equipment on and off while controlling power to internal parts. Made as a DPST (double-pole single-throw) rocker switch, it controls two circuits at once, helping make sure power is distributed correctly. It fits a standard 7/8" x 1-1/2" panel opening and has four 1/4" tab terminals for secure wiring connections. Rated for 125/277V and 20 amps, it works well with equipment that needs reliable switching under normal commercial electrical use. Often found in foodservice equipment like warmers, coffee machines, ovens, and griddles, this switch is important for daily use by allowing controlled start and stop. If a switch wears out or stops working, it can cause power problems or equipment to act unpredictably. Replacing it helps bring back proper electrical control, letting the unit work as it should in kitchens, cafeterias, and service areas where reliable switching is needed.
Equipment Compatibility:
Widely used in power control systems for Cres Cor Rocker Switch include commercial warmers, coffee machines, ovens, griddles, and warewashing equipment, where on/off switching is required. This Rocker Switch 0808-116-K is compatible with commercial equipment from leading brands such as Cres Cor, Bloomfield, Delfield, Jackson, and Southbend, and more, where controlled electrical switching is required for reliable operation.
Brand Compatibility:
This component replaces equivalent rocker switch references used in commercial foodservice equipment from Cres Cor, Bloomfield, Delfield, Jackson, Southbend, and more, where reliable on/off electrical switching and stable power control are required for consistent equipment operation. Complete cross-reference details are provided separately.
Product Specifications:
Product Type: Rocker Switch
Manufacturer: Cres Cor
SKU: 0808-116-K
Switch Type: DPST (Double Pole Single Throw)
Operation: On/Off rocker style
Voltage Rating: 125/277V
Current Rating: 20 Amp
Mounting Size: Fits 7/8" x 1-1/2" panel cutout
Terminals: 4 terminals with 1/4" tab connections
Key Features:
- The DPST design allows control of two circuits at once, helping manage power safely and efficiently.
- Rated for 125/277V and 20 amps, it supports common commercial equipment electrical loads.
- Fits a 7/8" x 1-1/2" panel opening for proper installation in compatible units.
- On/off rocker operation provides simple and direct equipment control.
- Four 1/4" tab terminals allow secure and stable electrical connections.
- Replacing a worn switch can restore proper power control and prevent operational interruptions.
- Suitable for use across a wide range of foodservice equipment.
- Supports consistent equipment response during daily operation.
Installation feedback often mentions improved power switching response and more reliable equipment start/stop after replacement.
BLOOMFIELD:
CRES COR:
0808 116K 0808-116 0808-116K 0808116 0808116K 808-116-K 808-116K CRE0808-116-K CRE808-116-K CRE808-116K
DELFIELD:
2194409 DEL2194409
HOBART:
00-87711-219-1 87711-219-1 HOB00-87711-219-1 HOB87711-219-1
JACKSON:
05930-011-49-55 5930-011-49-55 59300114955 JAC5930-011-49-55
SOUTHBEND:
STAR MFG:
Step1: Disconnect power to the appliance before starting.
Step2: Remove the old switch by pulling it from the panel and disconnecting wires.
Step3: Connect wires to the new rocker switch according to original configuration.
Step4: Insert the switch into the panel until it snaps securely in place.
Step5: Restore power and test the switch for proper operation.
-
What maintenance is required for the Cres Cor 0808-116-K Rocker Switch?
Inspect the rocker switch periodically for loose wiring, dirt buildup, or signs of wear. Keep the switch area clean and dry to prevent electrical issues. Ensure the switch moves smoothly without sticking. Always disconnect power before inspection or servicing to reduce the risk of electrical shock.
-
What are common issues with the Cres Cor 0808-116-K Rocker Switch?
- The switch is failing to toggle properly or sticking in one position.
- Intermittent power due to worn or loose internal contacts.
- Electrical arcing is causing inconsistent operation.
- Cracked or damaged rocker surface affecting accurate switching.
Customer Reviews
Write a Review
-
Reliable Operation
Replaced the cracked switch, system powers on without flickering now.
-
Effortless Switching
Great functionality, easy to install
-
Excellent Part
I needed a replacement switch, and this one worked perfectly. It was easy to setup and performs perfectly as intended. Highly recommended.
We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More
We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More
This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More