Glastender 09000298 Evaporator 5-Blade Fan 5-1/2" CW 3/16" Hole Black Plastic

SKU: 09000298 1-09000298 Brand:
Glastender
Availability:
In Stock
(0)
$10.94 Price reduced from $12.15
Save $1.21
Have a Question? +1 (866) 863-0907

Specifications:

  • Plastic Fan Blade
  • 5-1/2" Cw Blade, 3/16" Hole, 5 Blades, Black
  • Rotation Cw Looking From Back Of Blade - Motor Side -
  • Facing Air Discharge.
  • Delfield 4427N, 4427N-6, 4427N-9M, 4432N, 4432N-12M, 4448N,
  • 4448N-12, 4448N-18M, 4448N-8, 4460N, 4460N-12, 4460N-12M,
  • 4460N-18M, 4460N-24M, 4460N-8, 4462N-18M, 4464N, 4464N-12,
  • 4464N-12M, 4464N-16, 4464N-24M, 4464N-30M, 4464N-8, 4472N,
  • 4472N-12, 4472N-18M, 4472N-24M, 9036, 9048, 9060, 9072,
  • D4427N, D4427N-9M, D4432N, D4432N-12M, D4448N, D4448N-18M,
  • D4448N-8, D4460N, D4460N-12, D4460N-12M, D4460N-18M,
  • D4460N-24M, D4460N-8, D4462N-18M, D4464N, D4464N-12,
  • D4464N-12M, D4464N-16, D4464N-24M, D4464N-8, D4472-24M,
  • D4472-30M, D4472N, D4472N-12, D4472N-18, D4472N-18M,Mfr2-G,
  • Mfr2-S, Mfr2N-S, Mfr3-S, Mrpt2-G, Mrpt2-S, Mrpt3-G,

Description

The Glastender 09000298 Evaporator 5-Blade Fan 5-1/2" CW 3/16" Hole Black Plastic is an air-moving tool that circulates air throughout the internal parts by spinning. The 5 1/2-inch blade set allows air to circulate evenly as the motor rotates the hub with a 3/16-inch center hole to control the exchange of heat. It is mounted on the motor shaft behind the cover shroud in the position of the evaporator or condenser fan in the cooler. The construction allows the consistent rotation and ensures the balance at the operating speeds.

Dimensions:

  • Weight: 0.1 lbs
  • Length: 5.5 in
  • Height: 0.5 in
  • Width: 5.5 in

This Part Fits the Following Models

100 models
Glastender MF24 Glastender MF36 Glastender MF48 Glastender MFV24 Glastender UCR24S-L Delfield 403 Delfield 407 Delfield 407-CA Delfield 4427-9M Delfield 4427N Delfield 4427N-6 Delfield 4427N-8 Delfield 4427N-9M Delfield 4432N Delfield 4432N-12M Delfield 4448N Delfield 4448N-12 Delfield 4448N-18M Delfield 4448N-8 Delfield 4460N Delfield 4460N-12 Delfield 4460N-12M Delfield 4460N-18M Delfield 4460N-24M Delfield 4460N-8 Delfield 4462N-18M Delfield 4464N Delfield 4464N-12 Delfield 4464N-12M Delfield 4464N-16 Delfield 4464N-24M Delfield 4464N-30M Delfield 4464N-8 Delfield 4472N Delfield 4472N-12 Delfield 4472N-18 Delfield 4472N-18M Delfield 4472N-24M Delfield 4472N-30M Delfield 448N-18M Delfield 6000XL Delfield 6025-HG Delfield 6025-S Delfield 6025XL-G Delfield 6025XL-GH Delfield 6025XLR-G Delfield 6025XLR-GH Delfield 6025XLR-S Delfield 6025XLR-SH Delfield 6025XL-S Delfield 6025XL-S4-MD1 Delfield 6025XL-SH Delfield 6025XL-SH-MD1 Delfield 6025XL-SH-MD8 Delfield 6025XL-SH-RB2 Delfield 6025XL-S-MD1 Delfield 6051-HG Delfield 6051-S Delfield 6051-SDT Delfield 6051-SL Delfield 6051XL-G Delfield 6051XL-GH Delfield 6051XL-G-RB1 Delfield 6051XLR-G Delfield 6051XLR-GH Delfield 6051XLR-S Delfield 6051XLR-SH Delfield 6051XL-S Delfield 6051XL-SH Delfield 6051XL-SH-MD1 Delfield 6051XL-S-MD1 Delfield 6076-HG Delfield 6076-S Delfield 6076-SDT Delfield 6076XL-G Delfield 6076XL-GH Delfield 6076XLR-G Delfield 6076XLR-GH Delfield 6076XLR-S Delfield 6076XLR-SH Delfield 6076XL-S Delfield 6076XL-SH Delfield 6076XL-SH-MD1 Delfield 6125-S Delfield 6125XLR-S Delfield 6125XLR-SH Delfield 6125XL-S Delfield 6125XL-S4-MD1 Delfield 6125XL-SH Delfield 6125XL-SH1-MD1 Delfield 6125XL-SH-MD1 Delfield 6125XL-SH-RB1 Delfield 6125XL-S-MD1 Delfield 6125XLS-WAG1 Delfield 6151-S Delfield 6151XLR-S Delfield 6151XLR-SH Delfield 6151XL-S Delfield 6151XL-SH Delfield 6151XL-SH-MD1
Showing of 100.0

BOHN:

5109E

DELFIELD:

351-7390 3516274 3517356 3517356-S 3517390 DEL3516274 DEL3517356 DEL3517390

GLASTENDER:

GT-032804 GT032804

KAIRAK:

325-60240-10 433090

NORLAKE:

123389

RANDELL:

RF FAN006 RF-FAN006 RFFAN006

TRAULSEN:

325-60240-10 433090 RFFAN006

Step1: Power off equipment, disconnect from power source, and ensure lockout/tagout if applicable. Wear gloves and eye protection.

Step2: Remove old fan blades and inspect hub for damage.

Step3: Align new blades with mounting hole on hub, ensuring clockwise rotation orientation.

Step4: Secure blades with proper fasteners, tighten evenly to manufacturer torque specifications

Step5: Restore power and carefully test rotation for balance and vibration.

  • What maintenance is required for the Glastender 09000298 Fan Blade?

    Regularly inspect the fan blades for cracks, warping, or debris buildup that could affect airflow. Clean the blades gently using a damp cloth to prevent dust accumulation. Ensure proper alignment and secure mounting. Always disconnect power before handling to ensure safety.

  • What are common issues with the Glastender 09000298 Fan Blade?

    • Cracking or breaking of blades during operation.
    • Imbalanced rotation causing vibration or noise.
    • Reduced airflow due to dust or debris accumulation.
    • Improper fit on shaft leading to slipping or inefficient performance.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More