Champion 100500 Dishwasher Vacuum Breaker 1/2" FPT Bronze

SKU: 100500 Availability:
In Stock
(0)
$94.52 Price reduced from $127.15
Save $32.63
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Vacuum Breaker, Brass, 1/2" Fpt, 125 Psi, 212 Degree F,
Repair Kit # 51-1483
Conbraco
Champion Dishwasher

Description

The Champion 100500 Dishwasher Vacuum Breaker Bronze is a part that avoids backflow with the ability to allow air into the line in the event condition, which safeguards the potable water supply. It opens to de-suction in case negative pressure is observed to prevent the back-drawing of water into the system. The vacuum breaker is mounted on the water supply inlet of the compatible dishwashers, and it is connected to the 1/2" FPT supply line. The vacuum breaker is used in the water supply safety system when the dishwasher is operating normally.

More Information:

  • CHAMPION:100500 ,113220||INSINGER:D-2241 ,D2-241 ,D2241

Step1: Turn off water supply and disconnect power to the dishwasher for safety.

Step2: Locate the vacuum breaker on the incoming water supply line.

Step3: Remove the old breaker by loosening the threaded connections.

Step4: Apply thread sealant and install the new vacuum breaker in correct orientation.

Step5: Tighten fittings securely without over-torquing.

Step6: Restore water supply, check for leaks, and test operation.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Champion 100500 Vacuum Breaker?

    Inspect the Dishwasher vacuum breaker regularly for leaks, corrosion, and mineral buildup. Clean internal components to maintain proper backflow prevention and water flow. Replace seals or the unit if performance drops or damage appears.

  • What are common issues with the Champion 100500 Vacuum Breaker?

    • Leakage from worn or damaged vacuum breaker seals.
    • Backflow prevention failure due to internal valve sticking.
    • Reduced water flow caused by mineral or scale buildup.
    • Cracking or corrosion in brass components under pressure.