Henny Penny 17407 Connector 1/2" MPT Male Elbow

SKU: 17407 Brand:
Henny Penny
Availability:
In Stock
(0)
$17.39 Price reduced from $27.60
Save $10.21
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Male 90 Degree Elbow, 1/2" Mpt In/Out
Henny Penny Fryer Cfa-500, Cfa-600, Computron 8000, Oe-100,
Oe-301, Oe-302, Oe-303, Oe-30X, Ofe-290, Ofe-291, Ofe-321,
Ofe-322, Ofe-323, Ofg-321, Ofg-322, Ofg-323, Ofg-390,
Ofg-391, Og-301, Og-302, Og-303, Og-30X, Pfe-500, Pfe-561,
Pfe-580Kfc, Pfe-581, Pfe-590, Pfe-591, Pfe-592, Pfe-600,
Pfg-500, Pfg-561, Pfg-600, Pfg-680Kfc, Pfg-690, Pfg-691

Description

The Henny Penny 17407 Connector 1/2" MPT Male Elbow a 90-degree pipe fitting with a male threaded end that diverts the flow of fluid or gas between two parts at an angle. The elbow is fitted when it is installed to Male Pipe Thread ports of hoses, valves, or piping to switch the direction of the line in the system. It is commonly applied in plumbing, gas, or steam conduits of kitchen equipment where a connection is required. The connector is inserted into threaded holes and connected to the next tubing or fittings to complete the line.

More Information:

  • HENNY PENNY:17407

Step1: Turn off equipment and disconnect gas or fluid supply before installation.

Step2: Remove the old elbow fitting using the proper tool.

Step3: Apply thread seal tape or proper pipe sealant to the male threads.

Step4: Thread the new elbow fitting into the connection point by hand.

Step5: Tighten securely with a wrench, avoiding over-tightening.

Step6: Restore supply and inspect carefully for leaks before operating the equipment.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Henny Penny 17407 Male Elbow?

    Inspect the elbow regularly for leaks, corrosion, or thread damage. Clean connections to prevent debris buildup that can affect sealing. Ensure tight fittings during reassembly. Proper maintenance can maintain secure flow connections and reduces system downtime.

  • What are common issues with the Henny Penny 17407 Male Elbow?

    • Thread wear causing loose fittings.
    • Leakage at connection points.
    • Corrosion from moisture exposure.
    • Misalignment during installation.
    • Blockage from debris buildup.
    • Cracked fitting body under pressure.
    • Improper sealing leading to drips.
    • Stripped threads reducing stability.