ROYAL RANGE 2568 Griddle Signal Light 1/2" 1/3W 250V

SKU: 2568 1-2568 Brand:
ROYAL RANGE
Availability:
In Stock
(0)
$9.60
Have a Question? +1 (866) 863-0907

Specifications:

  • 250V 1/3W [ Hole 1/2"] [3/16" Tab Terminals] [Color Red]
  • Type Raised/Flat ][ Bezel Chrome] [ Fastener Lock Tabs]
  • ,Flat On Side
  • Alto-Shaam Food Warmers
  • Blodgett Oven Kco-25E, Mt2136(E & G) For Australia & The
  • Netherlands, Mt3855G, Mt3870. Series: Ctb (Cook Only)~
  • Zephaire E W/Mechaincal Controls.
  • Ge/Hobart Oven, Warmer, Fryer
  • Groen Cfpc, Fpc, Dee, Tdb, Oven 1001
  • Savory Toaster Pd-4.
  • Vulcan Grill
  • Winston Warmer Cd32T03Se1 (England & Germany).

Description

The ROYAL RANGE 2568 Griddle Signal Light operates by lighting up when electrical current passes through the internal element, indicating that the control circuit is active. It has a low power draw that ensures it is still lit when attached to the equipment wiring. It is mounted on the front control panel of commercial griddles, and it mounts through a 1/2" panel opening. It is intended to be operated at 250 volts and requires only some 1/3 watts to indicate electrical status without compromising the normal operation.

Dimensions:

  • Weight: 0.1 lbs
  • Length: 1.2 in
  • Height: 0.5 in
  • Width: 0.5 in

This Part Fits the Following Models

100 models
Blodgett 1400 Blodgett 1405 Blodgett 1415 Blodgett 3E-SBF Blodgett AC-500 Blodgett BCH-30E Blodgett BCH-40E Blodgett BDO-100-E Blodgett BLP-30E Blodgett BLP-40E Blodgett BLP-E Blodgett BP-100 Blodgett BP-50 Blodgett CTB Blodgett CTB POPEYES Blodgett CTB WENDYS Blodgett CTB-1 Blodgett CTB-AP Blodgett CTB-G Blodgett CTB-GFB Blodgett CTBR Blodgett CTBR POPEYES Blodgett CTBR WENDYS Blodgett CTBR-AP Blodgett CTBR-G Blodgett CTBR-GFB Blodgett DFG-100 Blodgett DFG-200 Blodgett DFG-50 Blodgett KCO-25E Blodgett LTO SERIES Blodgett MARK V KFC Blodgett MARK V Series Blodgett MARK V XCEL SERIES Blodgett Mark V-100 Blodgett MARK V-100 XCEL Blodgett MARK V-IIIH Blodgett MARK V-IIIHD Blodgett MT1828G Blodgett MT2136E Blodgett MT2136G Blodgett MT3240E Blodgett MT3240G Blodgett MT3255G Blodgett MT3270E Blodgett MT3855G Blodgett MT3870 Blodgett SBF-3E Blodgett SBF-5E Blodgett SBF-E Blodgett SC-10E Blodgett SC-7E Blodgett SHO-100-E Blodgett SHO-E Blodgett SN-3E Blodgett SN-4E Blodgett SN-5E Blodgett Zephaire Blodgett ZEPHAIRE 240E PLUS Blodgett ZEPHAIRE 50E Blodgett ZEPHAIRE E PLUS Blodgett ZEPHAIRE G Blodgett ZEPHAIRE G PLUS Blodgett Zephaire-100-E Blodgett Zephaire-200-E Blodgett Zephaire-200-G CROWN STEAM EJ-10E CROWN STEAM EJ-7E CROWN STEAM EMTS-30 CROWN STEAM EMTS-40 CROWN STEAM EMTS-60 CROWN STEAM EPX-3 CROWN STEAM EPX-5 CROWN STEAM EPXN-3 CROWN STEAM EPXN-5 CROWN STEAM ETP-10E CROWN STEAM ETP-5E CROWN STEAM EZ18-3 CROWN STEAM EZ18-5 CROWN STEAM EZ24-3 CROWN STEAM EZ24-5 CROWN STEAM GMTS-30 CROWN STEAM GMTS-40 CROWN STEAM MPS-3E CROWN STEAM PS-3E CROWN STEAM PS-6E CROWN STEAM R18-4 CROWN STEAM R18A-4 CROWN STEAM ST-10M24E CROWN STEAM ST-10M24G CROWN STEAM ST-10M36D CROWN STEAM ST-10M36E CROWN STEAM ST-10M36G CROWN STEAM SXN-4 CROWN STEAM SXN-4M CROWN STEAM TS-3E CROWN STEAM TS-5E Groen CFPC-3 Groen CFPC-4 Groen FPC
Showing of 100.0

ADCRAFT:

SIGNAL

BLODGETT:

16037 40951 90101 BL16037 BL90101

CROWN STEAM:

4753-4

GENERAL ELECTRIC:

XNC25X68 XND25X5

GROEN:

016028 Z016028

HOBART:

00-347336-00001 00-906440-00013 347336-00001 347336-1 906440-00013 906440-13 XNC25X68/347336-1

LINCOLN:

51070SP

MARKET FORGE:

97-6271

RANDELL:

EL LGT500 ELLGT500 PWSKELLGT500

SAVORY:

51070 51070SP

SOUTHBEND:

4-PL07-1

VULCAN HART:

00-347336-00001 00-906440-00013 347336-00001 347336-1 906440-00013 906440-13

WINSTON:

PS1012/1 PS1012/3

Step1: Turn off power to the appliance before starting.

Step2: Remove the access panel to reach the signal light location.

Step3: Disconnect the wiring from the old signal light carefully.

Step4: Remove the old light from its mount.

Step5: Install the new signal light, aligning wires and securing the mount.

Step6: Reconnect wiring to matching terminals.

Step7: Replace the access panel, restore power, and test the light for proper operation.

  • What maintenance is required for the ROYAL RANGE 2568 Signal Light?

    Check the bulb or LED performance regularly. Clean the lens to ensure visibility. Inspect wiring for corrosion or loose connections. Proper control ensures accurate operation, clear signaling, and prevents unexpected equipment shutdowns.

  • What are common issues with the ROYAL RANGE 2568 Signal Light?

    • Burnt-out or flickering bulb/LED.
    • Loose electrical connections causing intermittent operation.
    • Dirty or obscured lens reducing visibility.
    • Wire corrosion leading to failure.
    • Incorrect voltage causing malperformance.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More