Hobart 998261 Solenoid Valve 1/2" 120/240V

SKU: 998261 Brand:
Hobart
Availability:
In Stock
(0)
$143.98 Price reduced from $162.20
Save $18.22
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
[ Hot Water/Steam Solenoid Valve ]
Max Temp 225F/107C, 1-150 Psi.
[ Size 1/2" Fpt ] [ Nc ]
[ 120/240 V ] [ Width 2-1/2" ] 10 Psi.
[ Brand Parker Jackes Evans ] [ Mfg# Gp407 ]
For Repair Kit Use # 51-1446
For Coil Use # 51-1205
Champion Dishwasher Kl-44, Kl-66, Upright Conveyor
Jackson Dishwasher 24 (B, Bf, L)
Vulcan Dishwasher, 3D-20
***For Champion 109886 And Jackson 4810-100-12-18, Use Ap#
8012103.
Jackson 4810-100-09-18 Is An Incorrect Cross - Special Order
If Needed***

Description

The Hobart 998261 Solenoid Valve regulates the flow of water or any other fluids by opening when an electrical signal is sent and closing when the signal is dispatched. The operation of the valve body requires that fluid pass through the valve body when energized, and controlled delivery to the connected system is possible. The valve is mounted directly in line with the commercial kitchen equipment plumbing that is compatible and is connected to the 1/2" ports and the electrical control circuits and it is intended to be used with 120/240V systems.

More Information:

  • HOBART:98260 ,98261 ,998260 ,998261||PARKER HANNIFIN:GP407-120/240V||VULCAN HART:98260 ,98261 ,998260 ,998261

Step1: Disconnect electrical power and shut off the water supply to the unit before starting.

Step2: Remove the access panel to locate the existing solenoid valve assembly.

Step3: Label and disconnect the electrical coil wires and inlet/outlet water lines.

Step4: Unthread and remove the old valve, ensuring seals and fittings are clean.

Step5: Install the new valve, aligning connections and tightening securely without overtightening.

Step6: Reconnect wiring, restore water and power, then test for leaks and proper fill operation.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Hobart 998261 Solenoid Valve?

    Inspect the solenoid valve regularly for leaks, corrosion, or electrical wear. Clean external surfaces to prevent dirt buildup around the coil and fittings. Ensure all electrical connections are tight and dry, and test valve operation to confirm smooth opening and closing.

  • What are common issues with the Hobart 998261 Solenoid Valve?

    • Valve failing to open or close properly.
    • Coil burnout causing no activation.
    • Water or gas leakage from seals.
    • Intermittent electrical connection issues.
    • Sticking due to debris or mineral buildup.