Vulcan Hart 00-712363 Gas Griddle Pilot Orifice LP

SKU: 00-712363 1-00-712363 Brand: Availability:
In Stock
(0)

$8.94


Have a Question? +1 (866) 863-0907

Specifications:

  • Lp Pilot Orifice .010" Hole X 1/4",
  • .372" Dia X .530" Long
  • Blodgett Oven Series 900, Early Units Updated & Units Made
  • After 1-25-09.
  • Henny Penny Fryer 600, Og- 301,302,303
  • Imperial Fryer If, Ihr, Ir
  • Vulcan Oven
  • Wolf Fryer Wtf-35, Wtf-42
  • Wolf Grill

Description

The Vulcan Hart 00-712363 Gas Griddle Pilot Orifice LP Systems is used to control the flow of propane to the pilot assembly, so that the ignition source remains consistent. This hole is fitted in the pilot system of commercial gas griddles that are widely used in restaurants, cafeterias and foodservice kitchens. It allows for maintaining consistent burner start-up and consistent heating operation during regular cooking operations by regulating, the amount of gas fed to the pilot flame. The fact that it has fine flow control assists in the overall efficiency and safety of the appliance.

Dimensions:

  • Weight: 0.01 lbs
  • Length: 0.5 in
  • Height: 0.5 in
  • Width: 0.25 in

This Part Fits the Following Models

100 models
Vulcan Hart 24RRG Vulcan Hart 36RRG Vulcan Hart 48RRG Vulcan Hart 60RRG Vulcan Hart 9000RE Vulcan Hart 924RE Vulcan Hart 924RX Vulcan Hart 936RE Vulcan Hart 936RX Vulcan Hart 948RE Vulcan Hart 948RE-CH1 Vulcan Hart 948RX Vulcan Hart 960RE Vulcan Hart 960RX Vulcan Hart 972RE Vulcan Hart 972RX Vulcan Hart AGM24 Vulcan Hart AGM36 Vulcan Hart AGM48 Vulcan Hart AGM60 Vulcan Hart AGM72 Vulcan Hart ASA24 Vulcan Hart ASA36 Vulcan Hart ASA48 Vulcan Hart ASA60 Vulcan Hart ASA72 Vulcan Hart CONV OVEN Vulcan Hart FHB1 Vulcan Hart FHB1F Vulcan Hart FHBI1 Vulcan Hart FHBI1F Vulcan Hart FHBIO Vulcan Hart FHBIO1 Vulcan Hart FHBO Vulcan Hart FHBO1 Vulcan Hart FK361 Vulcan Hart FK362 Vulcan Hart FK363 Vulcan Hart HB1 Vulcan Hart HB1C Vulcan Hart HB1F Vulcan Hart HB1FC Vulcan Hart HB2 Vulcan Hart HBI1 Vulcan Hart HBI1C Vulcan Hart HBI1F Vulcan Hart HBI1FC Vulcan Hart HBI2 Vulcan Hart MSA24 Vulcan Hart MSA36 Vulcan Hart MSA48 Vulcan Hart MSA60 Vulcan Hart MSA72 Vulcan Hart OVEN STD IGNIT Vulcan Hart STD OVEN Vulcan Hart TYG24C Vulcan Hart TYG36C Vulcan Hart TYG48C Vulcan Hart TYG60C Vulcan Hart TYG72C Vulcan Hart V1G12M Vulcan Hart V1G12S Vulcan Hart V1G24M Vulcan Hart V1G24S Vulcan Hart V212M Vulcan Hart V212S Vulcan Hart V218M Vulcan Hart V218S Vulcan Hart V2H36 Vulcan Hart V2H36C Vulcan Hart V2H36M Vulcan Hart V2H36S Vulcan Hart V3036 Vulcan Hart V3036C Vulcan Hart V3036M Vulcan Hart V3036S Vulcan Hart V3G36 Vulcan Hart V3G36C Vulcan Hart V3G36M Vulcan Hart V3G36S Vulcan Hart V424M Vulcan Hart V424S Vulcan Hart V436 Vulcan Hart V436C Vulcan Hart V436M Vulcan Hart V436S Vulcan Hart V636 Vulcan Hart V636C Vulcan Hart V636M Vulcan Hart V636S Vulcan Hart VCCG24 Vulcan Hart VCCG36 Vulcan Hart VCCG48 Vulcan Hart VCCG60 Vulcan Hart VCCG72 Vulcan Hart VCRG24-M Vulcan Hart VCRG24-T Vulcan Hart VCRG36-M Vulcan Hart VCRG36-T Vulcan Hart VCRG48-M
Showing of 100.0

AMERICAN RANGE:

11002 11007 A11110 AMR11002 AMR11007 AMRA11110

ANETS:

P8903-52

BAKERS PRIDE:

2A-M1245A BKPM1245X M1245X

BLODGETT:

52090 BL52090

COMSTOCK CASTLE:

ORL10

DYNAMIC COOKING SYSTEMS:

13028-10 DCS13028-10

HENNY PENNY:

32407 HEN32407

IMPERIAL:

1018 IMP1018

KEATING:

007766 007786 7786 KEA007786 KEA7786

ROYAL RANGE:

1652

SOUTHBEND:

1171524 SOU1171524

STERO:

STA2A-45352 STA2A-80401-02 STA2A45352 STA2A80401-02 STA2K-45357 STA2K45357 STA45352 STA45357 STA65352 STA80401-02 WEL2A-45352 WEL2A45352

U-LINE:

10-114

Step1: Turn off gas and allow equipment to cool completely before servicing.

Step2: Remove access panel and carefully detach pilot orifice assembly.

Step3: Install new orifice ensuring correct alignment and threading.

Step4: Tighten fitting without over-torquing to avoid damage.

Step5: Restore gas supply and check for leaks using solution.

Step6: Test ignition for proper flame pattern and stability.

  • What maintenance is required for the Vulcan Hart 00-712363 Pilot Orifice?

    Regularly inspect the pilot orifice for carbon buildup or debris that can restrict gas flow. Clean gently using compressed air or cleaning tools. Ensure proper alignment and tight fittings to maintain consistent ignition and safe operation.

  • What are common issues with the Vulcan Hart 00-712363 Pilot Orifice?

    • Blocked orifice restricting gas flow.
    • Irregular flame or weak ignition.
    • Carbon buildup causing inconsistent performance.
    • Misalignment leading to poor burner operation.
    • Orifice damage affecting gas distribution.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More