Vulcan Hart 00-881972 Signal Light 3/8" X 1-5/16" Red 250V

SKU: 00-881972 1-00-881972 Brand:
Vulcan Hart
Availability:
In Stock
(0)
$11.44 Price reduced from $11.56
Save $0.12
Have a Question? +1 (866) 863-0907

Specifications:

  • Red Signal Light
  • 250V [ Fits Hole 3/8" X 1-5/16" ] [1/4" Tabs ] [Color
  • Red] [ Type Hat Flat ][ Bezel Chrome] [ Lock Tabs]
  • Blodgett Oven Series: 1200, Ef/Eze (After 12/68), Ctb & Ctbr
  • (Before 7/5/83), Fa/Gzl (After 12/68 -208V), Re.
  • Frymaster Fryer
  • Hobart
  • Toastmaster
  • Victory

Description

The Vulcan Hart 00-881972 Signal Light 3/8" X 1-5/16" Red 250V is illuminated when electrical current is sent through its internal lamp, and the result is a red light that is used to indicate a particular status or condition on the equipment. The light of the lamp is seen through the red lens, and it is a clear visual indication. It is mounted on the control panel of compatible cooking appliances in a cutout of a panel. After mounting, the signal light is recessed into the panel so that the operators can easily check the operational conditions.

Dimensions:

  • Weight: 0.1 lbs
  • Length: 1.2 in
  • Height: 1 in
  • Width: 0.5 in

This Part Fits the Following Models

86 models
Vulcan Hart VECTS12 Vulcan Hart VECTS16 Vulcan Hart VETRS35 Vulcan Hart VETS30 Vulcan Hart VETS40 Vulcan Hart VSX9000 Blodgett 1200 Blodgett 1201 Blodgett 1214 Blodgett 20E-KTT Blodgett BCG Blodgett CTB Blodgett CTB POPEYES Blodgett CTB WENDYS Blodgett CTB/CTBR Blodgett CTB-1 Blodgett CTB-AP Blodgett CTBR Blodgett CTBR POPEYES Blodgett CTBR WENDYS Blodgett CTBR-AP Blodgett EF SERIES Blodgett EF/EZE Blodgett EF-11 Blodgett EZE SERIES Blodgett FA Series Blodgett FA/GZL Blodgett GZL Series Blodgett KTT-20E Blodgett RE Blodgett RE SERIES Blodgett WPB Blodgett WPB WARMER CROWN STEAM 20E-KTT CROWN STEAM DLTM-100 CROWN STEAM DLTM-100-2 CROWN STEAM DLTM-40 CROWN STEAM DLTM-40-2 CROWN STEAM DLTM-60 CROWN STEAM DLTM-60-2 CROWN STEAM DLTM-80 CROWN STEAM DLTM-80-2 CROWN STEAM ECTS-12 CROWN STEAM ELTM-100 CROWN STEAM ELTM-100-2 CROWN STEAM ELTM-40 CROWN STEAM ELTM-40-2 CROWN STEAM ELTM-60 CROWN STEAM ELTM-60-2 CROWN STEAM ELTM-80 CROWN STEAM ELTM-80-2 CROWN STEAM ES-30 CROWN STEAM ES-40 CROWN STEAM ETS-30 CROWN STEAM ETS-40 CROWN STEAM FT-100GL CROWN STEAM FT-20GL CROWN STEAM FT-30GL CROWN STEAM FT-40GL CROWN STEAM FT-40GLF CROWN STEAM FT-60GL CROWN STEAM FT-80GL CROWN STEAM KTT-20E CROWN STEAM VECTS16 CROWN STEAM VETRS35 CROWN STEAM VETS30 CROWN STEAM VETS40 CROWN STEAM VSX9000 Market Forge FT-100GL Market Forge FT-20GL Market Forge FT-30GL Market Forge FT-40GL Market Forge FT-40GLF Market Forge FT-60GL Market Forge FT-80GL Southbend 171-40D-4 Southbend 300 SERIES Southbend B32A-171 Southbend B32D-171 Southbend B32N-170 Southbend B32N-171 Southbend B32N-270 Southbend CO 300 Southbend CO1364D Southbend CO300 Series Southbend CO32-40C
Showing of 86.0

BLODGETT:

06504 15549 40954 6504 BL15549 BL6504

CLEVELAND:

104583 CLE104583 CLESK50057 SK50057

CROWN STEAM:

4996-4

FRYMASTER:

8070052

GARLAND:

228007-5

HOBART:

00-345751-00003 345751-3

MARKET FORGE:

97-5725 97-6166 976166

MIDDLEBY MARSHALL:

1523B8713

SOUTHBEND:

1161450 4-PL08-1 PE139 SOU1161450 SOUPE139

STAR MFG:

1433B8709 1523B8713 2E-1523B8713

VICTORY:

50102401 VT50102401

VULCAN HART:

881972

Step1: Turn off and disconnect power to the equipment before installation.

Step2: Locate the defective signal light and remove the access panel if necessary.

Step3: Disconnect the wiring from the old light carefully.

Step4: Remove the old signal light from the mounting hole.

Step5: Insert the new signal light securely into place.

Step6: Reconnect the wires to the correct terminals.

Step7: Restore power and test the indicator light for proper operation.

  • What maintenance is required for the Vulcan Hart 00-881972 Signal Light?

    Keep the lens clean to maintain bright visibility of the indicator. Inspect wiring for heat damage or looseness due to high-voltage use. Ensure proper grounding and secure mounting. Replace worn electrical components promptly to maintain safe and accurate operation.

  • What are common issues with the Vulcan Hart 00-881972 Signal Light?

    • Flickering under high voltage load.
    • Burned-out indicator lamp.
    • Loose or overheated wiring.
    • Cracked or heat-discolored lens.
    • Electrical short circuits.
    • Moisture affecting internal components.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More