Groen 123101S Steamer Element

SKU: 123101S Availability:
Out of Stock
(0)
$60.89 Price reduced from $73.72
Save $12.83
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Steamer Element W/Gasket, Wire Leads[ 208V 8000W 1-3Ph ]
[ 2-3/8" Ctrs Bolt Holes, 3" Sq Flange, 14" Inside Length,
[Terminals {Screw } , [Gasket ]
Note Old Style 94129(Z094129S) Has Spade Terminals, New
123101S Has Screw Term 10/32 X 1/4" Ph Phil,
Gasket Only # 32-1343

Description

The Groen 123101S Steamer Element is a high-quality replacement heating element for steamers. It features good heating performance in an efficient construction that provides a dependable output of steam for food preparation. The capacity is optimal for use in steamers which demand temperature control precision. It works quickly to heat up, cutting down commercial kitchen wait times. Constructed to survive high temperatures and repeated use, the element completes with minimal downtime during the restaurant and food service operations to reduce downtime, helping to keep kitchen operations moving efficiently.

More Information:

  • GROEN:094129 ,094129S ,123101 ,123101S ,94129 ,GR094129 ,GR94129 ,Z094129 ,Z094129S

Step1: Turn off and disconnect the appliance from the power and water supply.

Step2: Drain any remaining water from the unit.

Step3: Remove the old element by loosening mounting screws and disconnecting wiring.

Step4: Position the new element in place and reconnect the wiring securely.

Step5: Tighten screws without over-torquing to avoid damage.

Step6: Refill with water, restore power, and test the appliance for proper operation.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Groen 123101S Steamer Element?

    Steamer elements should be inspected for scale buildup and cleaned during routine descaling of the unit. Ensure proper water quality and flush the tank regularly to prevent mineral accumulation that can shorten.

  • How do I install the Groen 123101S Steamer Element?

    • Disconnect the power and allow the steamer to fully cool.
    • Drain the water reservoir/boiler section.
    • Remove access panels to reach the heating element housing.
    • Disconnect wiring from the old element, labeling each lead.
    • Unthread or unbolt the existing element from the tank.
    • Clean the mounting surface and gasket area.
    • Install the new Groen 123101S element with a proper seal or gasket.
    • Reconnect all wires according to your labels and tighten securely.
    • Refill the tank, check for leaks, and restore power.

  • What are the operating limitations of the Groen 123101S Steamer Element?

    Steamer elements of this type typically operate in the 208–240V range and run at 3–5 kW depending on the model they are installed in. They are designed to withstand high-moisture boiler environments but must remain fully submerged during operation.

  • What maintenance is required for the Groen 123101S Element?

    Regularly inspect the steamer element for mineral deposits and residue. Wipe or soak as recommended to prevent scaling. Check electrical terminals for corrosion, and ensure the element is seated correctly before reconnecting power.

  • What are common issues with the Groen 123101S Element?

    • Limescale buildup reducing heating efficiency.
    • Electrical burnout or coil failure.
    • Loose or corroded connections.
    • Uneven or inconsistent steam output.