Anets P8900-47 Thermocouple Coaxial Connector 25-35MV

SKU: P8900-47 1-P8900-47 Brand:
Anets
Availability:
In Stock
(0)
$19.25 Price reduced from $25.00
Save $5.75
Have a Question? +1 (866) 863-0907

Specifications:

  • 1980 Series Snap Fit 24" Thermocouple, 20-30 Mv
  • Coaxial Thermocouple Threads = 11/32"-32
  • Anets Grill Ss2436.
  • Dean Fryer Where Applicable
  • Dynamic Cooking Systems Oven Where Applicable.
  • Garland Broiler Model?

Description

The Anets P8900-47 Thermocouple Coaxial Connector 25-35MV is a component of the electrical connection that is used to connect a thermostat to the gas valve or control circuit. It carries the signal of the millivolts produced by the thermocouple when operating the pilot. This connector is applied in commercial gas fryers and cooking systems where the precise transfer of signals is needed. Correct connection can be used to ensure satisfactory flame detection and gas valve reaction. The coaxial connector is used in the ignition safety system and it aids in maintaining unity in communication.

Dimensions:

  • Weight: 0.2 lbs
  • Length: 5 in
  • Height: 0.5 in
  • Width: 4 in

This Part Fits the Following Models

93 models
Anets A24X24G/GC Anets A24X72G/GC Anets A30X24G/GC Anets A30X72G/GC Anets SG2460 Dean 11G Dean 1414G Dean 1824G Dean 2424G Dean 32G Dean M35/M40 WITH UNDER FRYER FILTER MACHINE Duke WB-302 Duke WB303 Duke WB-304 Duke WB-305 Pitco 35C+ Pitco 45C+ Pitco MKG60 Pitco Pitco Pitco SG14 Pitco SG14DI Pitco SG14R Pitco SG14RDI Pitco SG14RS Pitco SG14S-D Pitco SG14T Pitco SG14TDI Pitco SG18 Pitco SG18DI Pitco SG18F Pitco SG18S Pitco SG18S-D Pitco SGC Pitco SGM1824 Pitco SGM24 Pitco SGM34 Pitco SGSEBNB-14 Pitco SGSEBNB-18 Pitco SSH55 Pitco SSH75 Star Mfg 824TS Star Mfg 836TS Vulcan Hart 12 OPEN TOP Vulcan Hart 148L Vulcan Hart 148LC Vulcan Hart 160L Vulcan Hart 160L77R Vulcan Hart 160LC Vulcan Hart 24 GRIDDLE Vulcan Hart 24L Vulcan Hart 260L Vulcan Hart 260LC Vulcan Hart 260LCC Vulcan Hart 36 GRIDDLE Vulcan Hart 36C-6B Vulcan Hart 36FL Vulcan Hart 36FL77R Vulcan Hart 36L Vulcan Hart 36L77R Vulcan Hart 36LC Vulcan Hart 481FL Vulcan Hart 481FTL Vulcan Hart 481L Vulcan Hart 481LC Vulcan Hart 48L Vulcan Hart 60FL77R Vulcan Hart 60FLC Vulcan Hart 60L Vulcan Hart 60L77R Vulcan Hart 60LC Vulcan Hart 60LCC Vulcan Hart 900 SERIES Vulcan Hart 924A Vulcan Hart 936A Vulcan Hart 948A Vulcan Hart 960A Vulcan Hart 972A Vulcan Hart E-30-C Vulcan Hart E-30-O Vulcan Hart E-40-C Vulcan Hart E-40-O Vulcan Hart EG160 Vulcan Hart EG24 Vulcan Hart EG260 Vulcan Hart EG36 Vulcan Hart EG60 Vulcan Hart G-30-C Vulcan Hart G-30-O Vulcan Hart G-40-C Vulcan Hart G-40-O Vulcan Hart MG12 Vulcan Hart MG24CB Vulcan Hart VG24
Showing of 93.0

DEAN:

1149 807-3550 8073550

DUKE:

213590

DYNAMIC COOKING SYSTEMS:

13007-3

FRYMASTER:

1149 807-3550 8073550 FM1149 FM807-3550 FM8073550

GARLAND:

4102920 G01754-24

JADE RANGE:

4619900000

KEATING:

4485 KEA4485 KEAP15239L P15239L

METAL MASTERS:

310211

SOUTHBEND:

1173576 1182580

STAR MFG:

2J-Z4609 Z4609

STERO:

STA2J-Z4609 STAZ4609

VULCAN HART:

112788-1 20040 412788-1 920040 921565 VH112788-1 VH20040 VH412788-1 VH920040 VH921565

Step1: Turn off the appliance and allow it to cool completely to avoid burns.

Step2: Remove the old thermocouple by unscrewing it from the gas valve and burner bracket.

Step3: Insert the new thermocouple into the burner bracket in the same position.

Step4: Connect the threaded end to the gas valve securely, hand-tightening only.

Step5: Check alignment to ensure the tip sits properly in the flame.

Step6: Restore power/gas and test operation, observing safety precautions.

  • What maintenance is required for the Anets P8900-47 Thermocouple?

    Inspect the thermocouple tip for dirt, soot, or corrosion. Clean gently and ensure the connection to the gas control is tight. Disconnect power or gas supply before servicing. Proper maintenance ensures accurate flame sensing and stable operation.

  • What are the common issues with the Anets P8900-47 Thermocouple?

    • Burners may fail to ignite or shut off unexpectedly.
    • Inaccurate temperature sensing due to sensor contamination.
    • Loose or corroded connections at the gas valve.
    • Intermittent operation caused by physical damage to the thermocouple.
    • Delayed response affecting burner performance.

Customer Reviews

No reviews yet. Be the first to write one!

We strive to provide our customers with a hassle-free and efficient shopping experience. Our shipping policy ensures the timely delivery of your orders and complete customer satisfaction. View More

We are committed to ensuring your complete satisfaction with every purchase. We understand that circumstances may arise where you must return a product or request a refund. If for any reason you are not satisfied, you may return the item(s) according to the terms outlined below. View More

This Payment Policy outlines the terms and conditions governing all payments made for products purchased through our website. By making a purchase, you agree to be bound by this Payment Policy. View More