Pitco 60125501 Fryer Millivolt Thermopile 18" 2 Lead T-Pile-Armor

This thermopile is used in commercial gas cooking equipment to generate electrical power from the heat of a pilot flame. It sends a 750 MV signal to the gas valve, allowing the fryer or cooking equipment to function properly. The thermopile includes a two-lead wire setup, spade terminals, armored wire covering, and a PG9 adaptor for installation in compatible equipment. The armored wire provides protection in hot kitchen environments where cooking equipment operates continuously. This thermopile is used in gas-powered cooking equipment where a pilot flame is needed to generate electrical output for burner operation. It is commonly used in commercial fryers and heated kitchen equipment found in restaurants, school kitchens, and other food preparation areas. If the thermopile weakens or stops producing enough voltage, it may cause the burner to fail to stay lit or the pilot system to malfunction. Replacing a worn thermopile can restore proper ignition function and help ensure reliable burner startup during daily cooking.

Equipment Compatibility:
Key applications for Pitco Fryer Thermopile assemblies include commercial fryers, gas-heated cooking equipment, and braising pans used in foodservice kitchen environments. This Fryer Thermopile 60125501 is compatible with commercial kitchen equipment from leading brands such as Pitco, Frymaster, Dean, Anets, and Groen, and more, where pilot flame power generation and gas valve operation are required during equipment use. Brand Compatibility Replaces multiple part numbers across various commercial kitchen equipment brands, including Anets, Dean, Frymaster, Pitco, and Groen. Refer to the "Replaces Parts" section for complete cross-reference details.

Brand Compatibility:

Product Specifications:
Manufacturer: Pitco
SKU: 60125501
Product Type: Fryer Thermopile
Output Rating: 750 MV
Lead Configuration: 2 Lead Wire
Terminal Type: Spade Terminals
Style: 2 Screw Mount
Wire Protection: Armored
Includes: PG9 Adaptor
Application: Commercial Gas Fryers and Cooking Equipment

Key Features:

• Generates electrical power from the heat of a pilot flame to activate the gas valve.
• Provides a 750 MV output suitable for compatible fryer ignition systems.
• Features a two-lead wire design with spade terminals that fit two-screw mounting setups.
• Armored wire covering offers protection in high-heat kitchen environments.
• Includes a PG9 adaptor for use in compatible gas cooking equipment.

Installation feedback often mentions smoother ignition startup and improved burner response after thermopile replacement.

• ANETS:ANEP8903-22 ,P8903-22||DEAN:807-3485 ,8073485 ,810-2033 ,8102033||FRYMASTER:807-3485 ,8073485 ,8073565 ,810-2033 ,8102033 ,FM807-3485 ,FM8073485 ,FM810-2033 ,FM8102033||GROEN:001126 ,1126 ,GR001126 ,GR1126 ,GRZ001126 ,Z001126||PITCO:60125501 ,P8903-22 ,PT60125501

Step1: Turn off gas and allow fryer to cool completely.

Step2: Remove the access panel to locate the old thermopile.

Step3: Disconnect wiring leads from the existing thermopile carefully.

Step4: Install the new thermopile in the same position and orientation.

Step5: Reconnect wiring and secure it with any retaining clips.

Step6: Restore gas and power, then test pilot flame and operation.

• What maintenance is required for the Pitco 60125501 Thermopile?

  Regularly inspect the thermopile and leads for corrosion, damage, or loose connections. Ensure proper alignment with the burner flame for accurate voltage generation. Test output periodically to confirm a consistent signal to the gas control system during operation.

• What are common issues with the Pitco 60125501 Thermopile?

  • Thermopile failing to generate voltage.
  • Loose or damaged lead connections.
  • Delayed gas valve response.
  • Burner not staying lit.